Preparation and Characterization of LaAlO3 Ceramics from High Energy Ball Milling Powders

고에너지 볼 밀에 의한 LaAlO3 세라믹스의 제조와 특성

  • 최상수 (동명정보공업고등학교 정보전자과) ;
  • 서병준 (부경대학교 전자공학과) ;
  • 여기호 (부경대학교 전자공학과) ;
  • 정수태 (부경대학교 전자공학과)
  • Published : 2004.01.01


Fine LaAlO$_3$ powders wore successfully synthesized from La$_2$O$_3$ and ${\gamma}$ $Al_2$O$_3$ powders milling for 10∼50 hours via the high energy milling technique (mechanochemical method) in room temperature and air. The particle size of LaAlO$_3$ powder were estimated from XRD patterns and SEM images to be 160∼180 nm. The LaAlO$_3$ ceramics arc derived for the synthesized powders (milling for 10, 30 and 50 hours) by sintering at 140$0^{\circ}C$ and 150$0^{\circ}C$. The micrographs of grains showed an agglomeration and the degree of agglomeration increased with the milling time. The LaAlO$_3$ made from synthesized powders milling for 50 hours can be sintered to 99.5% of theoretical density at 150$0^{\circ}C$ for 1 hour. These ceramics exhibits a dielectric constant of 20, a dielectric loss of 0.0003 and a temperature coefficient of capacitance of 15 ppm/$^{\circ}C$ at 1 MHz.


  1. J. of Mater. Sci. Letters v.18 Chemical solution derived epitaxial Pb(Zr, Ti)O₃ films on textured LaNiO₃ electrode K.S.Hwang;B.Kang
  2. J. Mater. Res. v.14 no.1 Microwave dielectric properties and applications of rare-earth aluminates Soo-Yong Cho;In-Tae Kim;Kug Sun Hong
  3. 한국전기전자재료학회지 v.9 no.4 CaTiO₃-LaAlO₃계 세라믹스의 마이크로파 유전특성 김현재;송준태;여동훈
  4. J. Am. Ceram. Soc. v.74 no.2 Synthesis and preparation of lanthanum aluminate target for radio-frequency magnetron sputtering Gun Yong Sung;Kwang Yong Kang;in-Chong Park
  5. Applied Catalysis v.75 Stabilization of alumina by addition of lathanum Bernard Beguin;Edouard Garbowski;Michel Primet
  6. 한국요업학회지 v.39 no.1 La₂O₃-Al₂O₃와 La₂O₃-Al(OH)₃를 메카노케미칼로 처리한 LaAlO₃ 세라믹의 소결 및 유전 특성 최상수;조정호;김강언;정수태;조상희
  7. J. Am. Ceram. Soc. v.80 no.1 Low-temperature chemical synthesis of lanthanum momoaluminate Ercan Taspinar;A. Cuneyt Tas
  8. Pure Appl. Chem. v.71 no.4 Mechano chemistry an overview Jose F. Fernandez-Bertran
  9. J. Am. Ceram. Soc. v.83 no.2 Mechano chemical synthesis of lanthanum aluminate by grinding lanthanum oxide with transition alumina Qiwu Zhang;Fumio Saito
  10. Mater. Lett. v.42 Preparation and characterization of Pb(Zr, Ti)O₃ ceramics from high energy ball milling powders L.B.Kong;W.Zhu;O.K.Tan
  11. J. Am. Ceram. Soc. v.83 no.10 Synthesis and characterization of nanocrystalline lanthanide oxysulfide via a La(OH)₃ gel solvothermal route Yang Jiang;Yue Wu;Yi Xie;Yi-Tai Qian
  12. J. of solid state chemistry v.113 Mechanochemical reaction of hydrated oxides E.G.Avvakumov;E.T.Devyatkina;N.V.Kosova
  13. Powder technology v.97 Formation of CaTiO₃ by grinding from mixtures of CaO or Ca(OH)₂ with anatase or rutile at room temperature G.Mi;F.Saito;S.Suzuki;Y.Waseda
  14. The Chemistry of Ceramics Hiroaki Yanagida;Kunihiko Koumoto;Masaru Miyayama
  15. J. Am. Ceram. Soc. v.81 no.6 Ordering of octahedral vacancies in transition aluminas Yuan Go Wang;Paul M. Bronsveld;M.DeHosson
  16. NanoStructured Materials v.7 no.4 Microstructural evalution during high energy ball milling of Fe₂O₃-SiO₂powders J.Z.Jiang;Y.X.Zhou;S.Morup;C. Bender Koch
  17. 한국전기전자재료학회지 v.15 no.3 분쇄방식에 따른 LaAlO₃ 세라믹의 합성과 유전 특성 조정호;최상수;김강언;정수태;조상희
  18. 전기전자재료학회논문지 v.13 no.6 Ba[$Mg_{1/3}(Nb_{0.2}Ta_{0.8})_{2/3}$]O₃ 세라믹스의 밀도가 유전특성에 미치는 영향 김재윤;김부근;김강언;정수태;조상희