A Design of CMOS VCO Using Bandgap Voltage Reference

밴드갭 기준 전압을 이용한 CMOS 전압 제어 발진기의 설계

  • 최진호 (부산외국어대학교 컴퓨터ㆍ전자공학부)
  • Published : 2003.10.01

Abstract

A CMOS Voltage-Controlled Oscillator(VCO) for application at temperature stable system is designed. The VCO consists of bandgap voltage reference circuit, comparator, and voltage-to-current converter and the VCO has a temperature stable characteristics. The difference between simulated and calculated values is less than about 5% in output characteristics when the input voltage range is from 1V to 3.25V. The CMOS VCO has error less than about $\pm$0.85% in the temperature range from $-25^{\circ}C$ to $75^{\circ}C$.

Keywords

VCO;CMOS

References

  1. 김 재준, 서 윤득, 김 범섭, CMOS enhancement 기준 전압 발생기 설계, 제 2회 IDEC MPW 발표회 논문집, pp. 119-125
  2. F. N. Trofimenkoff, Farmarz Sabouri, et al, 'A Squatre-Rooting Voltage-to-Frequency Converter', IEEE Transactions on Instrumentation and Measurement, vol. 46, No. 5, pp.1208-1211, October, 1997 https://doi.org/10.1109/19.676744
  3. Jin-Ho Choi, 'Temperature Stable Voltage - to - Frequency Converter Using BiCMOS', IEICE Trans. on Electronics, vol E84-C, no. 10, October, 2000
  4. I. M. Filanovsky and Sean Sidong Cai., 'Temperature Stable BiCMOS Voltage-to-Frequency Converter', Proc. IEEE International Symposium on Circuits and System, ISCAS96, Atlanta, pp.349-352, May, 1996 https://doi.org/10.1109/ISCAS.1996.539901
  5. L. Ristic, : Sensor technology and devices, Artech House, Boston, 1994