The Study of Numerical Simulation on the Thermal Flow Performance for the Design of Low Emission Stoker Type Municipal Waste Incinerator

저공해 스토커형 도시폐기물 소각로 설계를 위한 열유동 수치해석 연구

  • 전영남 (조선대학교 환경공학부) ;
  • 송형운 (조선대학교 환경공학부 대학원) ;
  • 김미환 (조선대학교 환경공학부 대학원)
  • Published : 2002.06.01


A Numerical simulation on the thermal flow performance was carried out to propose the incinerator type for the domestic refuses and to investigate the design factor and operating conditions. The SSTI(Standard Stoker Type Incinerator) proposed in this study was modified from the type with central f)ow. It has the characteristics of good mixing between refuse and hot combustion gas in primary combustion chamber and between unburned gas inflowing and secondary air jet in secondary chamber. By predictive results, the SSTI was no recirculation zone in secondary chamber so that mixing time was increased with high residence time. It has good characteristics of combustion and low emission. Parametric screening studies have been understood with phenomenon of combustion in incinerator.


Stoker;Incinerator;Combustion;Numerical simulation;Thermal flow


  1. 김삼권, 김재형, 권명희, 김기헌, 김성환, 정상준, 정상구, 이경옥, 백영렬, 민병광, 1998, CFD 에 의한 도시폐기물 소각로 유동 해석, 국립환경연구원보, 20, 229-238.
  2. 환경부, 1998, 생활폐기물 소각시설 설치에 따른 기술지침.
  3. Spalding, D. S., 1994, Proposal for a Diffusional Radiation Model, Unpublished technical memorandum, CHAM, London.
  4. Lockwood, F. C., A. P. Salooja, and S. A. Syed, 1978, A Prediction Method for Coal-Furnaces, Comb. and Flame, 38, 1-15.
  5. Ravichandran, M. and F. C. Gouldin, 1992, Numerical simulation of incinerator overfire mixing, Combsust. Sci. and Tech., 85, 165-185.
  6. Magnussen, B. F. and H. Hjertager, 1976, On mathematical modeling of turbulent combustion with Special Emphasis on Soot Formation and Combustion, 16th Symp. (Int.) on Comb., The Combustion Institute, Pittsburgh, 719-729pp.
  7. 오현명, 2001, 스토커형 저공해 소각로 설계를 위한 비반응 유동해석에 관한 연구, 조선대학교 석사학위논문.
  8. Shin, D., J. H. Choi, V. Nasserzadeh, S. Choi, and J. Swithbank, 1999, Experimental measurements and computational modelling of a pilot scale incinerator, J. of the Institute of Energy, 72, 56-63.
  9. 이진욱, 박병수, 윤용승, 서정대, 허일상, 1999, 상업용 소각로 연소실 성능예측을 위한 수지해석 연구, 한국연소학회지, 4, 141-153.
  10. Nasserzadeh, V., J. Swithenbank, and B. Jones, 1991, Design optimization of a large municipal solid waste incinerator, Waste Management, 11, 249-261.