Fabrication and Operation Characteristics of Linear Ultrasonic Motor

L$_1$-B$_4$모드 선형 초음파 전동기의 제작과 운전 특성

  • 이명훈 (서울대 농·산업교육과) ;
  • 김진수 (한국교원대 기술교육과 교수·공박 김진수)
  • Published : 2001.06.01

Abstract

In this paper, a linear ultrasonic motor using piezoelectric ceramics was fabricated, and its operation characteristics were investigated. A linear ultrasonic motor using L$_1$-B$_4$model was composed of a stator and a rotor, and a stator was composed of piezoelectric ceramics and a elastic body. When applied frequency and voltage were 58.4kHz and 56V respectively, the feeding speed of the motor was 19.8 cm/s. A linear ultrasonic motor could be moved in left and right directions by the phase difference. Feeding speed and feeding force of a linear ultrasonic motor could be controlled by applied voltage. A linear ultrasonic motor had a droping torque-speed characteristic. The maximum efficiency of linear ultrasonic motor was 2.14%. Therefore, this linear ultrasonic motor can be expected to be used for a card-forwarding device, such as a card reader device and so on.

References

  1. 김진수, 이명훈 공역, 초음파 전동기의 이론과 응용, 성안당, pp. 120-122, 2000
  2. K. Uchino, Piezoelectric Actuators and Ultrasonic Motors, Kluwer Academic Publishers, Boston, p. 267, 1997
  3. 이종섭, 정수현, 임기조, 임태빈, 강성택, 채홍인, '$L_1-B_4$진동모드를 이용한 평판형 선형 초음파 모터의 설계 및 시제작', 전기전자재료학회논문지, Vol. 11, No. 10, pp. 861-865, 1998
  4. 김태열, 김범진, 박태곤, 김명호, Kenji Uchino, '$L_1-B_4$샌드위치형 진동자를 이용한 선형 초음파모터의 설계 및 특성', 전기전자재료학회논문지, Vol.13. No. 12, pp. 1025-1031, 2000
  5. Y. Tomikawa, T. Nishitsuka, T. Ogasawara, T. Takano, 'A Paper or Card Forwarding Device Using a Flat-Type Ultrasonic Motor,' Sensors and Materials, 1-6, pp. 359-379, 1989
  6. 이명훈, 김진수, '$L_1-B_4$모드를 이용한 선형 초음파 전동기의 시제작과 속도특성', 대한전기학회 충북지부 춘계학술대회 논문집, 충주대학교, pp. 21-24, 2000
  7. T. Sashida and T. Kenjo, An Introduction to Ultrasonic Motors, Clarendon Press, Oxford, pp. 17-24, 1993
  8. 指田年生, 見城尙志 공저, 超音波モ-タ入門, 統合電子出版社, pp. 187-193, 1991
  9. Jin-Soo Kim, Man-Ju Park, Kenji Uchino, 'Composite Ultrasonic Motors Using a Piezoelectric Disc and an Elastic Body of 'Windmill' Type', Ferroelectrics, Vol. 232, pp. 185-190, 1999
  10. 김영균, 김진수, '풍차형 초음파 전동기의 회전자에 인가된 힘이 회전특성에 미치는 영향', 전기전자재료학회논문지 Vol. 13, No. 5. pp. 390-395, 2000
  11. 박만주, 김진수, '단상 초음파 전동기의 공진 및 진동 속도 특성에 관한 연구', 전기전자재료학회논문지, Vol. 12, No. 4, pp. 312-318, 1999