Study on the Characteristics of Crevice Corrosion for STS304 Austenitic Stainless Steel(I)

오스테나이트계 스테인리스강의 틈부식 특성에 관한연구(I)

  • 임우조 (부경대학교)
  • Published : 2000.02.01

Abstract

In these days, with development of industry, the use of machines and structures like ships, airplanes, bridges, power plants, and structure for construction has increased and these machines and structures are used in various corrosive environment. Especially, in case of STS 304, which is material for every kind of machine and chemical plant, it makes many problems related with corrosion and as a result of this, there are happening tremendous economic loss. Therefor, in this study, the test for polarization characteristics was carried out to study characteristics of crevice corrosion of STS 304 which is austenitic stainless steel, in NaCl environment.The main results obtained are as follows :1) Part of crevice is corroded, neighboring outside surface of crevice is passivation. 2) In polarization behavior, corrosion potential of STS 304 become more noble as the concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5% that of STS 3.4 become less noble. 3) The current density under corrosion potential was high drained as concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5%, the current density was low drained.

Keywords

References

  1. Corros. Sci Sharland, S. M.;Tasker, P. W.
  2. Metallurgy of Welding Lancaster, J. F
  3. Corrosion Engeering(2nd ed.) Fontana, M. G.;Greene, N. D.
  4. 金屬の腐食 と防食技術 小若正倫
  5. 한국부식학회지 v.26 no.5 스테인리스강의 틈부식 개시단계 모델링에 관한 연구 장현영;박용수;황운석
  6. 日本溶接學會誌 v.41 no.2 オ-ステナイトステンレス鋼の溶接部の腐食 向井喜?
  7. 금속의 부식과 방식개론 尹秉河;金大龍
  8. 부식과 방식 임우조;양학회;인현만;이진열
  9. 과학기술처 UCE259-828-c 강재의 국부부식방지에 관한 연구 이규화;노병호;김만;이태평
  10. ステンレス鋼の溶接 吉武進也;中村治方
  11. 한국부식학회지 v.14 no.2 SUS 304강 스테인리스강재의 MgCl₂용액 중에서의 응력부식균열억제에 관한 연구 임우조;김영식
  12. Priciples and prevention of corrosion Denny, A. Jones
  13. Boshoku Gijusu v.29 M. Akashi;Kawamoto, T.;Unemura, F.
  14. Structure and properties of Ebinering alloys Smith, W. F.