Design and Fabrication of Small UWB Antenna

소형 UWB 안테나 설계 및 제작

  • Bae, Jin-Woo (School of Electronic Eng., Kumoh National Institute of Technology) ;
  • Ko, Ji-Hwan (School of Electronic Eng., Kumoh National Institute of Technology) ;
  • Cho, Young-Ki (School of Electronic Eng. and Computer Science, Kyungpook National University)
  • 배진우 (금오공과대학교 전자공학부) ;
  • 고지환 (금오공과대학교 전자공학부) ;
  • 조영기 (경북대학교 전자전기컴퓨터학부)
  • Published : 2005.11.05


In this paper, We have designed, fabricated and measured a stacked planar antenna for Ultra-Wideband communication. Radiation parts of the antenna have exponential curve and fed by strip feeding network. We have used the HFSS of Ansoft to simulate the antenna. It was designed to work on a substrate Teflon of thickness 1.575mm and relative permittivity 3.2. The proposed antenna covered the entire UWB band( 3.1GHz $\sim$ 10.6GHz ) for S11$\leq$l0dB. Also the proposed antenna show a good characteristics, linear phase, omni -directional pattern lot UWB applications. Besides the measured results have a reasonable agreement with the simulated results.


Ultra-Wideband;omni-directional;phase linearity;planar antenna;strip feeding