A Study on the Snap-through Behaviour According to the Initial Deflection Shape of Plate Members

초기처짐형상에 따른 판부재의 천이거동에 관한 연구

  • 고재용 (목포해양대학교 해양시스템공학부) ;
  • 이계희 (목포해양대학교 해양시스템공학) ;
  • 박주신 (목포해양대학교 해양시스템공학부)
  • Published : 2003.10.01


Recently, the buckling is easy to happen a thin plate and High Tensile Steel is used at the steel structure and marine structure so that it is wide. Especially, the post-buckling is becoming important design criteria in the ship structure to use especially the High Tensile Steel. Consequently, it is important that we grasp the conduct post-buckling behaviour accurately at the stability of the ship structure or marine structure. In this study, examined closely about conduct and snap-through behaviour after initial buckling of thin plate structure which apply compressive load according to various kinds initial deflection shape under all edges simply supported condition that make by buckling formula in each payment in advance rule to place which is representative construction of hull. Analysis method is F.E.M in used ANSYS program and complicated nonlinear behaviour to analyze such as secondary buckling with snap-through behaviour. Nonlinear buckling control is applied between newton-raphson method and arc-length method in this study